In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks that you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you will have to cut around the edge of the mask so you get something which resembles a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can make certain that nothing will leak once you put the mask on. Be sure the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you are done, so you don’t end up with smudges or smears on your dog.

Then it’s time to paste the mask onto your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made http://lesoleilfashion.com/finding-the-best-cheap-dog-food/ sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged firmly onto the face of your dog. Don’t make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain that the ears are flat and be certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask as your dog protection, you will have to do some sanding to be sure that it is secure on your dog. You can accomplish this by sanding off any excess paper that may have been removed from your mask.